HP printer error 59.F0 may be caused due to the failure in transfer alienation. Another possible reason for the error 59.F0 in the HP printer can be a problem with the SR9 sensor. This error happens when there is a problem in the internal motor of the printer. Transfer alienation is a situation in which the Intermediate Transfer Belt (ITB) gets stuck and does not fully rotate. You may also try revitalizing your HP device. In addition, you can check for any issue in the fuser motor as well as the internal motor. If you are facing more error like – HP Printer Error 30 e1, e2, e3, e4, 19a0020, e9, 30, Dot4_001 Error, 0x61000f6 etc. So you can help yourself by clicking on these links.
Causes of the HP Printer Error 59.F0
- There may be a situation where the transfer alienation has failed due to this ITB is not able to fully rotate.
- It can be an issue with the SR9 sensor.
- An issue might be there with the internal motor of your printer machine.
How to fix HP Printer Error 59.F0 ?
Method 1: Reset the printer
- Reset the HP printer settings and remove the Surge Protector.
- If the problems remain unresolved, move on to the next method.
Method 2: Reset the ITB
Reset the ITB and check the internal connections of ITB such as the connection between ITB and a transfer-roller-disengagement sensor located at connector J19 and the connection between ITB and DC controller PCA also known as connector J128.
Method 3: Test the ITB
- Remove the ITB completely and then test the ITB gear and the flag manually.
- Rotate the gear and check for any fluctuation in the flag when you turn the white gear.
- If the flag is found to be damaged, then it is high time to replace the ITB.
- Now, Check for the Sensor SR9. For this, you will have to follow the following steps to do the Manual Sensor test.
- Remove the ITB gear, locate the Sensor SR9 located inside the ITB cavity and browse the control panel.
- Press the ‘Home’ button and press the down arrow to diagnostics menu.
- Click on the okay button and select the Manual Sensor Test and click OK.
- Check inside the ITB cavity and release the SR9 flag and check the display for the sensor response when you press the flag.
Method 4: Contact HP Technical Help
HP has an excellent team of highly qualified professionals who can diagnose the problem quickly and make the necessary corrections. There are multiple phone lines which you can use to contact them, or you can also email them if you want to attach pictures or videos of the problem so that the matter is very clear to them.
Conclusion :
We are discussing here about the HP Z6100 Printer Error 79-04 in which you will get all the procedures and steps to fix Error. As we all know that there are so many errors our HP printer faced. If you want to know about the fixing the HP Printer Error e1, e2, e3, e4, 19a0020, e9, 30, 0xc19a0003, Dot4_001 Error you can get information by clicking here.